我的 2 个地址（简称 A 和 B ）都是同城电信千兆宽带（百兆上传），之前发现 A 地址的上传被限速到 10M （上传 1MB/s ） 然后打 10000 后和 it 后台人员理论后，先说找不到问题，然后我发了 A 和 B 宽带互测的 iperf 的截图和理论当前电信官网的测试白名单机制后，过了一周多，直接收到工单完成的短信。
于是我用之前被限速的测速网站后，发现上传是恢复了……（吗？）
在 B 宽带处用 iperf 通过 tailscale 测试连接的速度后。发现 A 宽带还是被限速到 10M 。
然后我用 iperf 通过公网 ip 来测（要开高位端口才行，默认端口连不通），发现 tcp 的限速有时候被取消了。但是 udp 的还是一直被限速。 之所以说有时候，是因为测了一会，就可能会触发限速
通过公网直接从 B 宽带的测试结果（反向模式，A 传输给 B ，测试 A 的上传）：
> iperf3.exe -c {public ip} -p 25021 -u -b 100M
[ 4] local {lan ip} port 53674 connected to {public ip} port 25021
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-1.01 sec 10.9 MBytes 90.2 Mbits/sec 1395
[ 4] 1.01-2.00 sec 12.0 MBytes 102 Mbits/sec 1535
[ 4] 2.00-3.01 sec 12.0 MBytes 100 Mbits/sec 1534
[ 4] 3.01-4.01 sec 11.7 MBytes 98.3 Mbits/sec 1503
[ 4] 4.01-5.01 sec 11.9 MBytes 99.9 Mbits/sec 1527
[ 4] 5.01-6.00 sec 12.0 MBytes 102 Mbits/sec 1538
[ 4] 6.00-7.00 sec 11.9 MBytes 100 Mbits/sec 1529
[ 4] 7.00-8.00 sec 11.9 MBytes 100 Mbits/sec 1529
[ 4] 8.00-9.01 sec 11.8 MBytes 98.4 Mbits/sec 1506
[ 4] 9.01-10.01 sec 11.9 MBytes 99.7 Mbits/sec 1527
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-10.01 sec 118 MBytes 99.0 Mbits/sec 0.362 ms 6548/15101 (43%)
[ 4] Sent 15101 datagrams
> iperf3.exe -c {public ip} -p 25021 -u -b 100M -R
Connecting to host {public ip}, port 25021
Reverse mode, remote host 218.78.176.224 is sending
[ 4] local {lan ip} port 49192 connected to {public ip} port 25021
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-1.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 1.01-2.00 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 2.00-3.02 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 3.02-4.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
[ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec 0.000 ms 0/0 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-10.01 sec 120 MBytes 100 Mbits/sec 0.000 ms 0/0 (0%)
[ 4] Sent 0 datagrams
测了几次以后，在继续通过公网测试就会这样：
Reverse mode, remote host {public ip} is sending
[ 4] local {lan ip} port 5913 connected to {public ip} port 25021
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 1.67 MBytes 14.0 Mbits/sec
[ 4] 1.00-2.01 sec 589 KBytes 4.82 Mbits/sec
[ 4] 2.01-3.02 sec 588 KBytes 4.77 Mbits/sec
[ 4] 3.02-4.00 sec 595 KBytes 4.95 Mbits/sec
[ 4] 4.00-5.00 sec 592 KBytes 4.84 Mbits/sec
[ 4] 5.00-6.01 sec 581 KBytes 4.74 Mbits/sec
[ 4] 6.01-7.00 sec 608 KBytes 5.01 Mbits/sec
[ 4] 7.00-8.00 sec 591 KBytes 4.82 Mbits/sec
[ 4] 8.00-9.00 sec 593 KBytes 4.87 Mbits/sec
[ 4] 9.00-10.00 sec 586 KBytes 4.81 Mbits/sec
[ 4] 10.00-11.00 sec 603 KBytes 4.94 Mbits/sec
[ 4] 11.00-12.00 sec 592 KBytes 4.85 Mbits/sec
[ 4] 12.00-13.00 sec 592 KBytes 4.85 Mbits/sec
[ 4] 13.00-14.00 sec 593 KBytes 4.85 Mbits/sec
[ 4] 14.00-15.00 sec 592 KBytes 4.85 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-15.00 sec 10.2 MBytes 5.73 Mbits/sec 823 sender
[ 4] 0.00-15.00 sec 9.90 MBytes 5.53 Mbits/sec receiver
Server output:
-----------------------------------------------------------
Server listening on 25021 (test #3)
-----------------------------------------------------------
Accepted connection from {public ip}, port 5912
[ 5] local 172.16.1.2 port 25021 connected to 58.35.163.121 port 5913
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.12 MBytes 17.8 Mbits/sec 450 7.03 KBytes
[ 5] 1.00-2.00 sec 512 KBytes 4.19 Mbits/sec 19 7.03 KBytes
[ 5] 2.00-3.00 sec 512 KBytes 4.20 Mbits/sec 22 8.44 KBytes
[ 5] 3.00-4.00 sec 640 KBytes 5.24 Mbits/sec 28 7.03 KBytes
[ 5] 4.00-5.00 sec 640 KBytes 5.25 Mbits/sec 19 7.03 KBytes
[ 5] 5.00-6.00 sec 640 KBytes 5.24 Mbits/sec 23 7.03 KBytes
[ 5] 6.00-7.00 sec 512 KBytes 4.19 Mbits/sec 34 5.62 KBytes
[ 5] 7.00-8.00 sec 512 KBytes 4.19 Mbits/sec 24 7.03 KBytes
[ 5] 8.00-9.00 sec 768 KBytes 6.30 Mbits/sec 27 8.44 KBytes
[ 5] 9.00-10.00 sec 512 KBytes 4.19 Mbits/sec 37 7.03 KBytes
[ 5] 10.00-11.00 sec 512 KBytes 4.19 Mbits/sec 28 5.62 KBytes
[ 5] 11.00-12.00 sec 640 KBytes 5.25 Mbits/sec 30 7.03 KBytes
[ 5] 12.00-13.00 sec 768 KBytes 6.29 Mbits/sec 23 8.44 KBytes
[ 5] 13.00-14.00 sec 512 KBytes 4.19 Mbits/sec 24 7.03 KBytes
[ 5] 14.00-15.00 sec 512 KBytes 4.19 Mbits/sec 35 7.03 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-15.01 sec 10.1 MBytes 5.66 Mbits/sec 823 sender
如果是在 B 宽带处通过 tailscale 测试就一直这样,限速 10M： UDP
iperf3.exe -c 172.16.1.2 -R -u -b 100M -t 15 --get-server-output
Connecting to host 172.16.1.2, port 5201
Reverse mode, remote host 172.16.1.2 is sending
[ 4] local 100.88.112.34 port 59706 connected to 172.16.1.2 port 5201
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-1.00 sec 1.89 MBytes 15.8 Mbits/sec 19284.648 ms 0/242 (0%)
[ 4] 1.00-2.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 3.01-4.00 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 4.00-5.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 5.01-6.00 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 7.00-8.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 10.01-11.00 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 11.00-12.01 sec 0.00 Bytes 0.00 bits/sec 19284.648 ms 0/0 (0%)
[ 4] 12.01-13.00 sec 32.0 KBytes 264 Kbits/sec 14913.186 ms 18911/18915 (1e+02%)
[ 4] 13.00-14.01 sec 1.15 MBytes 9.57 Mbits/sec 7.996 ms 1270/1417 (90%)
[ 4] 14.01-15.01 sec 1.30 MBytes 10.9 Mbits/sec 4.413 ms 762/929 (82%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-15.01 sec 179 MBytes 100 Mbits/sec 2.946 ms 22171/22927 (97%)
[ 4] Sent 22927 datagrams
Server output:
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
Accepted connection from 172.16.2.1, port 5903
[ 5] local 172.16.1.2 port 5201 connected to 172.16.2.1 port 59706
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 11.9 MBytes 99.9 Mbits/sec 1529
[ 5] 1.00-2.00 sec 11.9 MBytes 100 Mbits/sec 1527
[ 5] 2.00-3.00 sec 11.9 MBytes 100 Mbits/sec 1526
[ 5] 3.00-4.00 sec 11.9 MBytes 99.9 Mbits/sec 1524
[ 5] 4.00-5.00 sec 11.9 MBytes 100 Mbits/sec 1525
[ 5] 5.00-6.00 sec 11.9 MBytes 99.9 Mbits/sec 1525
[ 5] 6.00-7.00 sec 11.9 MBytes 100 Mbits/sec 1528
[ 5] 7.00-8.00 sec 11.9 MBytes 99.9 Mbits/sec 1526
[ 5] 8.00-9.00 sec 11.9 MBytes 100 Mbits/sec 1526
[ 5] 9.00-10.00 sec 11.9 MBytes 100 Mbits/sec 1525
[ 5] 10.00-11.00 sec 11.9 MBytes 100 Mbits/sec 1525
[ 5] 11.00-12.00 sec 11.9 MBytes 99.9 Mbits/sec 1527
[ 5] 12.00-13.00 sec 11.9 MBytes 100 Mbits/sec 1525
[ 5] 13.00-14.00 sec 11.9 MBytes 99.9 Mbits/sec 1525
[ 5] 14.00-15.00 sec 11.9 MBytes 99.9 Mbits/sec 1526
[ 5] 15.00-15.03 sec 336 KBytes 105 Mbits/sec 41
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-15.03 sec 179 MBytes 100 Mbits/sec 0.000 ms 0/22930 (0%) sender
TCP
iperf3.exe -c 172.16.1.2 -R -P 4 -b 100M -t 15 --get-server-output
Connecting to host 172.16.1.2, port 5201
Reverse mode, remote host 172.16.1.2 is sending
[ 4] local 100.88.112.34 port 6007 connected to 172.16.1.2 port 5201
[ 6] local 100.88.112.34 port 6008 connected to 172.16.1.2 port 5201
[ 8] local 100.88.112.34 port 6009 connected to 172.16.1.2 port 5201
[ 10] local 100.88.112.34 port 6010 connected to 172.16.1.2 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 597 KBytes 4.88 Mbits/sec
[ 6] 0.00-1.00 sec 550 KBytes 4.49 Mbits/sec
...
[SUM] 14.00-15.00 sec 1006 KBytes 8.23 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-15.00 sec 3.88 MBytes 2.17 Mbits/sec 258 sender
[ 4] 0.00-15.00 sec 3.88 MBytes 2.17 Mbits/sec receiver
[ 6] 0.00-15.00 sec 4.50 MBytes 2.52 Mbits/sec 303 sender
[ 6] 0.00-15.00 sec 4.42 MBytes 2.47 Mbits/sec receiver
[ 8] 0.00-15.00 sec 5.00 MBytes 2.80 Mbits/sec 347 sender
[ 8] 0.00-15.00 sec 4.96 MBytes 2.77 Mbits/sec receiver
[ 10] 0.00-15.00 sec 3.00 MBytes 1.68 Mbits/sec 230 sender
[ 10] 0.00-15.00 sec 2.97 MBytes 1.66 Mbits/sec receiver
[SUM] 0.00-15.00 sec 16.4 MBytes 9.16 Mbits/sec 1138 sender
[SUM] 0.00-15.00 sec 16.2 MBytes 9.07 Mbits/sec receiver
Server output:
-----------------------------------------------------------
Server listening on 5201 (test #3)
-----------------------------------------------------------
Accepted connection from 172.16.2.1, port 6006
[ 5] local 172.16.1.2 port 5201 connected to 172.16.2.1 port 6007
[ 8] local 172.16.1.2 port 5201 connected to 172.16.2.1 port 6008
[ 10] local 172.16.1.2 port 5201 connected to 172.16.2.1 port 6009
[ 12] local 172.16.1.2 port 5201 connected to 172.16.2.1 port 6010
...
[SUM] 14.00-15.00 sec 1.12 MBytes 9.45 Mbits/sec 89
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-15.01 sec 3.75 MBytes 2.10 Mbits/sec 258 sender
[ 8] 0.00-15.01 sec 4.38 MBytes 2.44 Mbits/sec 303 sender
[ 10] 0.00-15.01 sec 5.00 MBytes 2.79 Mbits/sec 347 sender
[ 12] 0.00-15.01 sec 3.00 MBytes 1.68 Mbits/sec 230 sender
[SUM] 0.00-15.01 sec 16.1 MBytes 9.01 Mbits/sec 1138 sender
应该是 tailscale 的隧道是走的 UDP ，所以不管什么流量都会被封装在 tailscale 的 UDP 里。 另外好奇为什么公网直接 UDP 传输速度全部是 0 ？
这是一个专为移动设备优化的页面（即为了让你能够在 Google 搜索结果里秒开这个页面），如果你希望参与 V2EX 社区的讨论，你可以继续到 V2EX 上打开本讨论主题的完整版本。
V2EX 是创意工作者们的社区，是一个分享自己正在做的有趣事物、交流想法，可以遇见新朋友甚至新机会的地方。
V2EX is a community of developers, designers and creative people.